CYSBSYSKIT-01 BSP¶
-
group
index
Overview
The CYSBSYSKIT-01 Rapid IoT Connect Platform RP01 Feather Kit comes with a CYSBSYS-RP01 Rapid IoT Connect module which enables a secure, scalable, and reliable connection to cloud. CYSBSYS-RP01 is a pre-certified 802.11ac-friendly dual-band (2.4 and 5.0 GHz) Wi-Fi and Bluetooth 5.0-compliant combo radio module. CYSBSYS-RP01 when combined with Infineon SubSystems connectivity services enables rapid deployment of devices on to an IoT network.
To use code from the BSP, simply include a reference to cybsp.h.
Features
Kit Features:
CYSBSYS-RP01 module
512KB Flash and 512KB SRAM for customer application on CM4
512-Mbit external Quad SPI NOR Flash that provides a fast, expandable memory for data and code
KitProg3 on-board SWD programmer/debugger, USB-UART, and USB-I2C bridge functionality
A user LED, a user button, and a reset button
Battery connector, charging IC, and charging indicator LED
One KitProg3 mode button, one KitProg3 status LED, and one KitProg3 power LED
OPTIGA™ Trust M advanced security controller for secure data storage
Thermistor for sensing the ambient temperature
16KB of Emulated EEPROM
Kit Contents:
CYSBSYSKIT-01 Rapid IoT Connect Platform RP01 Feather Kit
Adafruit 128 x 32 OLED Screen FeatherWing (Adafruit product ID: 2900)
BSP Configuration
The BSP has a few hooks that allow its behavior to be configured. Some of these items are enabled by default while others must be explicitly enabled. Items enabled by default are specified in the CYSBSYSKIT-01.mk file. The items that are enabled can be changed by creating a custom BSP or by editing the application makefile.
Components:
Device specific category reference (e.g.: CAT1) - This component, enabled by default, pulls in any device specific code for this board.
BSP_DESIGN_MODUS - This component, enabled by default, causes the Configurator generated code for this specific BSP to be included. This should not be used at the same time as the CUSTOM_DESIGN_MODUS component.
CUSTOM_DESIGN_MODUS - This component, disabled by default, causes the Configurator generated code from the application to be included. This assumes that the application provides configurator generated code. This should not be used at the same time as the BSP_DESIGN_MODUS component.
Defines:
CYBSP_WIFI_CAPABLE - This define, disabled by default, causes the BSP to initialize the interface to an onboard wireless chip if it has one.
CY_USING_HAL - This define, enabled by default, specifies that the HAL is intended to be used by the application. This will cause the BSP to include the applicable header file and to initialize the system level drivers.
Clock Configuration
Clock
Source
Output Frequency
PLL
IMO
100.0 MHz
CLK_HF0
CLK_PATH1
100 MHz
CLK_HF2
CLK_PATH1
50 MHz
CLK_HF4
CLK_PATH1
100 MHz
See the BSP Setttings for additional board specific configuration settings.
API Reference Manual
The CYSBSYSKIT-01 Board Support Package provides a set of APIs to configure, initialize and use the board resources.
See the BSP API Reference Manual for the complete list of the provided interfaces.
More information
© Cypress Semiconductor Corporation, 2019-2021.